Replacing the LED fan

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .

Release the latch mechanisms (arrows).
Turn the cover cap (1) towards the left, open and remove.

Courtesy of BMW OF NORTH AMERICA, INC.
Release screw (1) the cover (2).
Feed out the cover (2) from the guides.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect the connector (1) from the LED fan (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Turn the fan (1) towards the left, release it from the cover (2) and remove.
Replace the fan (1).
Parts: LED fan
Position the fan (1) on the cover (2), turn towards the right and engage.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the connector (1) to the LED fan (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed cover (2) into the guides.

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

LED fan
Screw 40x10	tightening torque	1.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.