Installing the rear trim

Precondition 

Number plate has been removed.

• Install rear trim (1) and engage into the clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nuts (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Trim, trunk lid
  Nut	tightening torque	4.4 Nm
  Oval-head screw	tightening torque	3.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carry out for version as of 03.19: 

  Tighten down screw (1).

  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Trim, trunk lid
  Nut	tightening torque	4.4 Nm
  Oval-head screw	tightening torque	3.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to INSTALLING TRUNK COMPARTMENT LIGHT ON TRUNK LID .
• Refer to INSTALLING THE POWER TAILGATE SWITCH .