Lower front axle support

If installed on left: Remove spray guard 

• Loosen screw (1) from spray guard.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1) from spray guard (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Leave the spray guard (1) loose on output shaft (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lower the front axle support (1) by dimension (A).

  Dimension (A) = maximum of 10 cm

  Courtesy of BMW OF NORTH AMERICA, INC.