Install the thrust field

• Position thrust field (1).
• Replace screws (2).

  Parts:  screw

• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Thrust field to front axle support
  M8 Replace screws.	Joining torque	25 Nm
  	Angle of rotation	70°

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Cover, steering unit
  screw	Tightening torque	3 Nm

• Tighten down screws (4).

Follow-up work 

• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .