Installing the bracket for the oxygen sensor connector

• Position the bracket for the oxygen sensor connector (2).
• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Oxygen sensor connector holder
  M6x16 screw	Tightening torque  8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the vehicle wiring harness.
• Lock the wiring harness mountings (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the cable (1) in the metal clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.