Installing the heat shield on the exhaust manifold
- Position the heat shield (4).
- Tighten down screws (3).TIGHTENING TORQUES SPECIFICATION
Heat shield to cylinder head M8x12 Tightening torque 19 Nm - Attach heat shield (2) in marked area.
- Tighten down screw (1).TIGHTENING TORQUES SPECIFICATION
Heat shield to cylinder head M8x12 Tightening torque 19 Nm - Tighten the bolt (1) on the heat shield (2).TIGHTENING TORQUES SPECIFICATION
Heat shield to trim strip M6x12 Tightening torque 8 Nm