12 14 CAMSHAFT POSITION SENSOR AND KNOCK SENSOR (530i 2017-2022, 530i xDrive 2017-2022, 540i 2021-2022, 540i xDrive 2021-2022)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
12 14 TIGHTENING TORQUE OVERVIEW
| Camshaft position sensor for exhaust camshaft on cylinder head cover | ||
| TS5x20 | tightening torque | 4 Nm |
| Camshaft position sensor for intake camshaft on cylinder head cover | ||
| TS5x20 | tightening torque | 4 Nm |
| Exhaust camshaft sensor to cylinder head cover | ||
| TS5x20 | tightening torque | 4 Nm |
| Holder for transmission oil line | ||
| Screw | Tightening torque | 4 Nm |
| Holder on end cover | ||
| M6X16 | Tightening torque | 8 Nm |
| Intake camshaft sensor to cylinder head cover | ||
| TS5x20 | tightening torque | 4 Nm |
| Knock sensor to crankcase | ||
| M8x30 Observe tightening torque without fail! |
tightening torque | 21.5 Nm |
| Thermostat holder to crankcase/end cover | ||
| M6X16 | tightening torque | 8 Nm |