11 65 CHARGER WITH CONTROL (M550i xDrive 2020-2022)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 65 TIGHTENING TORQUE OVERVIEW
| Blow-off valve to exhaust turbocharger | ||
| M6 | tightening torque | 9±1 Nm |
| Exhaust turbocharger to exhaust manifold | ||
| V-band clamp Replace V-band clamp. |
Tightening torque | 20 Nm |
| Heat protection plate | ||
| M6x16 | tightening torque | 10 Nm |
| Heat protection plate | ||
| M6x12 screw Replace screw. |
tightening torque | 10 Nm |
| Lock nut on wastegate valve controller to exhaust turbocharger | ||
| M6 | Tightening torque | 6.6 ± 1 Nm |
| Oil return line at the exhaust turbocharger | ||
| M6x16 Replace screws. |
Joining torque | 5 Nm |
| Angle of rotation | 60° | |
| Support bridge | ||
| M6x16 screw | Tightening torque | 10 Nm |
| Wastegate valve controller to exhaust turbocharger | ||
| M4x12 | Tightening torque | 2 ± 0.3 Nm |