11 65 CHARGER WITH CONTROL (M550i xDrive 2018-2019)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 65 TIGHTENING TORQUE OVERVIEW
| Bottom heat shield | ||
| M6x12 | Tightening torque | 10 Nm |
| Exhaust turbocharger to exhaust manifold | ||
| V-ribbon clip Replace V-ribbon clip. |
tightening torque | 13 Nm |
| Exhaust turbocharger to exhaust turbocharger V-band clamp | ||
| M8 Replace V-band clamp. |
Tightening torque | 13 Nm |
| Heat protection plate | ||
| M6x16 | tightening torque | 10 Nm |
| Heat shield, top | ||
| M6x12 | Tightening torque | 10 Nm |
| Heat shield to cylinder head cover | ||
| M6x12 | Tightening torque | 10 Nm |
| Heat shield to heat shield | ||
| M6 | Tightening torque | 10 Nm |
| Lock nut on wastegate valve controller to exhaust turbocharger | ||
| M6 | Tightening torque | 6.6 ± 1 Nm |
| Oil return line at the exhaust turbocharger | ||
| M6x16 Replace screws. |
Joining torque | 5 Nm |
| Angle of rotation | 60° | |
| Wastegate valve controller to exhaust turbocharger | ||
| M4x12 | Tightening torque | 2 ± 0.3 Nm |