11 61 INTAKE SYSTEM (530e xDrive PHEV 2018-2020)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 61 INTAKE MANIFOLD - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake manifold to cylinder head | All | M8 | Tightening torque | 22 Nm |
| All | M7 | Tightening torque | 15 Nm | |
| All | M6 | Tightening torque | 10 Nm | |
| 2AZ Sound absorption cover to holder | M60/1/M60/2/M62 | M6 | Tightening torque | 8 Nm |
| 3AZ Throttle valve to intake manifold | N73 | M6x60/M6x80 | Tightening torque | 8 Nm |
11 61 TIGHTENING TORQUE OVERVIEW
| Front/rear support for intake system to engine block | ||
| M6 x 16 | Tightening torque | 10 Nm |
| Intake plenum to cylinder head | ||
| Observe tightening sequence. | Joining torque | 5 Nm |
| Tightening torque | 10 Nm | |
| Intake plenum to rear/front support | ||
| BM6 x 25 | Tightening torque | 10 Nm |
| Tank vent line to intake plenum | ||
| TS5 x 16 | Tightening torque | 5 Nm |
| Wiring harness to intake plenum | ||
| Tightening torque | 5 Nm | |