11 41 OIL PUMPS WITH STRAINER AND DRIVE (530e xDrive PHEV 2018-2020)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 41 TIGHTENING TORQUE OVERVIEW
| Hydraulic valve to crankcase | ||
| M6 x 18 | Tightening torque | 8 Nm |
| Oil intake manifold to oil pump | ||
| Hexagon screw M6x25 | Tightening torque | 8 Nm |
| Oil pump to crankcase | ||
| External Torx socket M8x35 | Tightening torque | 19 Nm |
| Sprocket wheel at the oil vacuum pump | ||
| Torx socket M8x1.25LHx35 Replace screw. Left-hand thread! |
Joining torque | 5 Nm |
| Angle of rotation | 90° | |
| Sprocket wheel at the oil vacuum pump | ||
| M8
IMPORTANT:
left-hand thread Replace screw. |
1. Joining torque | 5 Nm |
| 2. Angle of rotation | 90° | |