11 36 VARIABLE CAMSHAFT TIMING CONTROL (530e xDrive PHEV 2018-2020)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 36 TIGHTENING TORQUE OVERVIEW
| Camshaft sensor wheel to intake camshaft | ||
| M4 x35 | Tightening torque | 4.5 Nm |
| VANOS central valve to camshaft | ||
| M12 x 1 1. | Tightening torque | 30 Nm |
| 2. Tightening torque | 50 Nm | |
| 3. Angle of rotation | 65° | |
| M21 VANOS central valve on the thread and on the contact surface must be coated with engine oil. |
1. Tightening torque | 50 Nm |
| 2. Tightening torque | 115 Nm | |
| M22 VANOS central valve on the thread and on the contact surface must be coated with engine oil. |
1. Tightening torque | 50 Nm |
| 2. Tightening torque | 140 Nm | |