11 31 CAMSHAFT (M550i xDrive 2020-2022)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 31 TIGHTENING TORQUE OVERVIEW
| Bearing screw to engine block | ||
| Bearing screw M10x1.25 Replace the bearing screw. Clean the thread in the engine block with a screw tap. |
tightening torque | 46 Nm |
| Bearing screw to engine block | ||
| Bearing screw M8x1.25 Replace the bearing screw. Clean the thread in the engine block with a screw tap. |
tightening torque | 20 Nm |
| Chain tensioner to cylinder head | ||
| screw | Tightening torque | 13 Nm |
| Collar screw to the slide rail | ||
| Collar screw M6x48 | Tightening torque | 10 Nm |
| Flat-head screw to the slide rail | ||
| Flat-head screw M6x67 | Tightening torque | 10 Nm |
| Preload timing chain | ||
| tightening torque | 0.6 Nm | |
| Slide rail to cylinder head | ||
| Bearing screw | Tightening torque | 25 Nm |