11 31 CAMSHAFT (530e xDrive PHEV 2018-2020)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 31 TIGHTENING TORQUE OVERVIEW
| Bearing journal to crankcase | ||
| Replace bearing journal. Clean thread. |
tightening torque | 20 Nm |
| Bearing journal to cylinder head | ||
| Replace bearing journal. | tightening torque | 20 Nm |
| Bottom chain tensioner to crankcase | ||
| M6 x 22 Clean thread. |
tightening torque | 9 Nm |
| Chain tensioner to cylinder head | ||
| Chain tensioner piston M22x1.5 | Joining torque | 20 Nm |
| Angle of rotation | 30° | |
| Exhaust camshaft to cylinder head | ||
| M6 Tensile strength of screw 8.8 |
Joining torque | 9.6 Nm |
| tightening torque | 9.6 Nm | |
| M6 Tensile strength of screw 10.9 |
Joining torque | 11.8 Nm |
| tightening torque | 11.8 Nm | |
| Intake camshaft to cylinder head | ||
| M6 Tensile strength of screw 8.8 |
Joining torque | 9.6 Nm |
| tightening torque | 9.6 Nm | |
| M6 Tensile strength of screw 10.9 |
Joining torque | 11.8 Nm |
| tightening torque | 11.8 Nm | |
| Preload timing chain | ||
| tightening torque | 0.6 Nm | |
| Sprocket wheel at the crankcase | ||
| Clean thread. | tightening torque | 108 Nm |