11 31 CAMSHAFT (530e PHEV 2018-2022, 530e xDrive PHEV 2021-2022)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 31 TIGHTENING TORQUE OVERVIEW
| Basic carrier to cylinder head | ||
| M6 | Tightening torque | 8 Nm |
| Bearing journal to crankcase | ||
| Bearing journal Replace bearing journal. |
Tightening torque | 22 Nm |
| Chain tensioner to cylinder head | ||
| Chain tensioner | Joining torque | 20 Nm |
| Angle of rotation | 40° | |
| Exhaust camshaft to cylinder head | ||
| M6 Tensile strength of screw 8.8 |
Joining torque | 9.6 Nm |
| tightening torque | 9.6 Nm | |
| M6 Tensile strength of screw 10.9 |
Joining torque | 11.8 Nm |
| tightening torque | 11.8 Nm | |
| Intake camshaft to cylinder head | ||
| M6 Tensile strength of screw 8.8 |
Joining torque | 9.6 Nm |
| tightening torque | 9.6 Nm | |
| M6 Tensile strength of screw 10.9 |
Joining torque | 11.8 Nm |
| tightening torque | 11.8 Nm | |
| Preload timing chain | ||
| tightening torque | 0.6 Nm | |
| Test gauge to basic carrier | ||
| M6 | Tightening torque | 8 Nm |