11 21 CRANKSHAFT WITH BEARING (M550i xDrive 2020-2022)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 Replace screws |
Jointing torque | 5.0 Nm |
| Torque angle | 45° | |||
| Increment wheel on crankshaft | M5 10.9 Replace screws |
Tightening torque | 13 Nm | |
| Increment wheel on crankshaft | M5 8.8 Replace screws |
Tightening torque | 5.5 Nm |
11 21 TIGHTENING TORQUE OVERVIEW
| Threaded support bushing | ||
| Threaded support bushing | Tightening torque | 6 Nm |