11 12 CYLINDER HEAD WITH LID (M550i xDrive 2020-2022)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 12 TIGHTENING TORQUE OVERVIEW
| Cylinder head bolt | ||
| M11 Replace screws. |
Joining torque | 30 Nm |
| 1. Angle of rotation | 90° | |
| 2. Angle of rotation | 140° | |
| Cylinder head bolt to timing case cover | ||
| M8x30 | tightening torque | 23 Nm |
| Cylinder head cover to cylinder head | ||
| M6x30 screw | Tightening torque | 10 Nm |
| Cylinder head to special tool | ||
| screw | Tightening torque | 25 Nm |
| Engine suspension element | ||
| M8x22 screw | Tightening torque | 20 Nm |
| Flange to assembly jig | ||
| M14X30 | Tightening torque | 135 Nm |
| Fuel line | ||
| M6x16 | Tightening torque | 10 Nm |
| Intake/exhaust camshaft | ||
| M6 | Tightening torque | 10 Nm |
| Oil filler neck | ||
| M6x16 | tightening torque | 10 Nm |
| Sealing cap on cylinder head cover | ||
| M6x25 screw | tightening torque | 10 Nm |
| Sealing cap to cylinder head | ||
| M6x20 screw | Tightening torque | 9.5 Nm |
| Special tool to cylinder head 1 to 4 | ||
| M6x15 | tightening torque | 10 Nm |
| Special tool to cylinder head bank 2 | ||
| M8 screw | tightening torque | 25 Nm |
| Stud bolt on cylinder head | ||
| M8x50 Replace the stud bolt. |
tightening torque | 20 Nm |
| Valve in cylinder head | ||
| valve | Tightening torque | 0.8 Nm |
| Venting connector/special tool to cylinder head | ||
| M8x1 Replace the venting connector. |
Tightening torque | 15 Nm |