11 11 ENGINE BLOCK (540i 2017-2020, 540i xDrive 2017-2020)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 11 ENGINE BLOCK - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (collar screw 11.9) | B42S20O0/B46M0/O0/B48M0/O0 | M10x1.5 Replace screws and screw in hand-tight. |
1. Joining torque | 25 Nm |
| 2. Angle of rotation | 60° | |||
| 3. Angle of rotation | 60° | |||
| 2AZ Oil spray nozzle in crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M6 | tightening torque | 8 Nm |
| 3AZ Bearing journal of tensioning and guide rail | B42S20O0/B46M0/O0/B48M0/O0 | M8 Replace bolt. |
tightening torque | 20 Nm |
| 4AZ Camshaft wheel with ball bearing to crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M12x1.5 | tightening torque | 108 Nm |
| 5AZ Special tool/holder to crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M10x35 | tightening torque | 40 Nm |
| 6AZ Special tool 11 8 930 to special tool 00 2 300 | B42S20O0/B46M0/O0/B48M0/O0 | M14x35 | tightening torque | 160 Nm |
| 7AZ Chain tensioner to crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M6x22 | tightening torque | 10 Nm |
| 8AZ Spacing screw for acoustic cover on engine block (Key range 17) | B42S20O0/B46M0/O0/B48M0/O0 | M8x12 | tightening torque | 12 Nm |
11 11 TIGHTENING TORQUE OVERVIEW
| Special tool 2 413 082 to special tool 00 2 320 | ||
| M12x65 | Tightening torque | 100 Nm |