11 00 ENGINE (530e xDrive PHEV 2018-2020)
WARNING: This page does not describe the selected car, but rather 40 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2023 BMW 530e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 00 TIGHTENING TORQUE OVERVIEW
| Engine mounting bracket on assembly jig | ||
| M14 x 95 | Tightening torque | 130 Nm |
| Engine mount to engine mounting bracket | ||
| Hexagon screws from special tool set | Tightening torque | 105 Nm |
| Motor mount on the engine stand | ||
| M10 | Tightening torque | 100 Nm |
| Special tool 2 318 635 on special tool 00 6 041 | ||
| M8 | Tightening torque | 19 Nm |
| Standard screw connection 4 Nm | ||
| Oval-head screw | Tightening torque | 4 Nm |
| Standard screw connection hose clamp 5 | ||
| Hose clamp L12 - L15 | tightening torque | 1.25 Nm |
| Standard screw connection M10 | ||
| M10 | Tightening torque | 38 Nm |
| Standard screw connection M5 | ||
| M5 | Tightening torque | 5 Nm |
| Standard screw connection M6 | ||
| M6 | Tightening torque | 8 Nm |
| Standard screw connection M7 | ||
| M7 | Tightening torque | 13 Nm |
| Standard screw connection M8 | ||
| M8 | Tightening torque | 19 Nm |