Removing and installing/replacing cover for rear window frame, top (330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 325
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Release cover (1) using special tool 00 9 325 at clips and remove.
Installation note:
Clips (1) and guides (2) at cover (3) must not be missing or damaged.
If necessary, replace clips (1).
Replacement
Remount clip (1) of cover (3).