Removing and installing/replacing striker for tailgate lock (330i xDrive Wagon, 328d xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove rear lid TRIM .
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Release screws (1).
Tightening torque 51 24 8AZ .
Feed out striker (2) for tailgate lock.
Installation note:
Adjust REAR LID LOCK .
IMPORTANT:
Striker and tailgate lock must not be greased.