Removing and installing/replacing rear lid lock (330i xDrive Wagon, 328d xDrive Wagon)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove tail panel TOP COVER .

Unlock plug connection (1) and disconnect.

Unhook Bowden cable (2) on tailgate lock (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect associated plug connection and release screws (1).

Tightening torque 51 24 1AZ .

Feed out rear lid lock (2) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Perform a function check of tailgate lock with the tailgate open.

Concluding tasks:

Adjust REAR LID LOCK .