Remove the center console trim
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
TECHNICAL INFORMATION
The following parts must be remounted upon replacing the center console trim: power socket and interior antenna for Comfort Access.
For additional information see: 61 34... REMOVING AND INSTALLING/REPLACING 12-V POWER SOCKET and 61 35... REMOVING AND INSTALLING/REPLACING LUGGAGE COMPARTMENT AERIAL FOR COMFORT ACCESS (front storage compartment)
The following parts must be remounted upon replacing the center console trim: power socket and interior antenna for Comfort Access.
For additional information see: 61 34... REMOVING AND INSTALLING/REPLACING 12-V POWER SOCKET and 61 35... REMOVING AND INSTALLING/REPLACING LUGGAGE COMPARTMENT AERIAL FOR COMFORT ACCESS (front storage compartment)
Preliminary work
- Remove the center console DECORATIVE TRIM
- Detach the GEARSHIFT LEVER COVER
- Remove the center console OPERATING FACILITY
- Loosen screws (1).
- Release the center console trim (2) with the special tool 0 496 569 (00 9 325) at the clamps (3).
- Lift the center console trim (2) slightly and disconnect associated plug connections.
- Thread out center console trim (2) to top rear.