Removing and installing/replacing cowl panel cover (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove both WINDSCREEN WIPER ARMS .
- Remove the left and right engine compartment COVER
Release expanding rivets/clips (1) on left/right.
Turn snap fastener (2) approx. 90° counterclockwise.
Lift out cover (3).
Installation note:
Replace damaged expanding rivets/clips (1).
Check cover (3) for correct fit.
Close snap fasteners (2) from the middle.
The fastener is closed if the arrow tips point to each other.