Removing and installing/replacing guide for the bumper panel, rear left or right (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear bumper TRIM

Release screws (1).

Tightening torque 51 12 3AZ .

Unscrew nuts (2).

Tightening torque 51 12 3AZ .

Remove guide (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanisms (2) and gasket (3) of the guide (1) must not be damaged or missing.

Courtesy of BMW OF NORTH AMERICA, INC.