99 00... GENERAL INSTRUCTIONS ON PAINTWORK (330i xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
General instructions and classification of paint stages are described on the KSD CD (under Notes, General information on flat rate unit data, Passenger car explanation for FRU specifications for paintwork).
The marked area shows the basis of area calculation for creating the flat rate unit unit. The marked area does not show the area actually to be painted. If touching up is required, the painter defines the precise position as he sees fit.
Special procedure for matte paintwork:
Matte paintwork cannot be touched up since the painted surface cannot be polished.
For further information, see also the BMW painting handbook in the S-Gate dealer portal.