Install the Headunit High (HU-H)

• Connect and lock the connector (3) to the head unit (4).
• Correctly position the cable clip (2) and engage it with the detent (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: RISK OF DAMAGE 
  Damage to the instrument cluster (KOMBI) or the head unit 
  A ground offset can occur when releasing and connecting the cables. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable. 

  • When releasing: First release the APIX data cable (blue).
  • When connecting: Connect the APIX data cable (blue) last.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock all the connectors in the marked area with head unit (1) in the correct assembly sequence.

  All cables must be routed correctly.

• Push the head unit (2) into the dashboard and tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING RADIO OPERATING UNIT AND AIR CONDITIONING CONTROL PANEL .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE RIGHT DASHBOARD .
• Refer to INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .
• Refer to CONNECTING BATTERY GROUND LEAD .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .