Insert top automatic air flap control

• Connect top air flap control (3)  with the appropriate connector.
• Feed out air flap control, top (3)  and clip the holder (1)  , left and right into the ball head (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Top automatic air flap control.
  screw	Tightening torque	4 Nm

• Attach the expanding rivets (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.