Connect the refrigerant line to the expansion valve
- Protect the oxygen sensor cable (1) from mechanical damage.
- Replace O-rings.
Parts: O-rings
- Correctly position the refrigerant line (3) .
- Engage hose support (4) .
- Tighten nut (2)
.TIGHTENING TORQUES SPECIFICATION
Refrigerant line to expansion valve/connecting piece M6 tightening torque 13 Nm - On version A:
Position the holder (1) correctly at the refrigerant line (2) and close.
- On version B:
Close the holder (1) on the refrigerant line (2) .