Attaching the wiring harness section for the ignition system of cylinder bank 1

• Position the wiring harness section for the ignition system (2)  .
• Tighten down screws (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Wiring harness to cylinder head cover
  M6x16 screw	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the expansion tank (1)  for the charge air cooler.

Tighten down screw (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.