Installing the instrument cluster (KOMBI)
NOTE:
RISK OF DAMAGE
Damage to the instrument cluster (KOMBI) or the head unit
A ground offset can occur when releasing and connecting the cables. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable .
Damage to the instrument cluster (KOMBI) or the head unit
A ground offset can occur when releasing and connecting the cables. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable .
- When releasing: First release the APIX data cable (blue).
- When connecting: Connect the APIX data cable (blue) last.
- Connect the connector (1) with the instrument cluster (KOMBI) and lock it.
- Connect and lock the blue connector (2) to the instrument cluster (KOMBI).
- Insert the instrument cluster (KOMBI) (1) in the marked area (2) in arrow direction.
- Tighten down screws (3).
TIGHTENING TORQUES SPECIFICATION
| Instrument cluster (KOMBI) to support | ||
|---|---|---|
| Oval-head screw | Tightening torque | 1.8 Nm |
Follow-up work
- FITTING STEERING COLUMN SHROUD UPPER SECTION .
- INSTALLING THE DECORATIVE STRIP ON THE DASHBOARD ON THE LEFT .
- INSTALLING THE SIDE PANEL ON LEFT DASHBOARD .
- INSTALLING THE DECORATIVE STRIP ON THE RIGHT DASHBOARD .
- INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .
- CONNECTING BATTERY GROUND LEAD .
- ACTIVATING THE 48 V ELECTRICAL SYSTEM .