Install both tail lights on the side panel

Install the tail light on the side panel 

• Check the threaded bolt (1) and the guide (2) on the tail light (4) for damage and replace if necessary.
• Replace seals (3).

  Parts:  Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the tail light (2).
• Replace nuts (1).

  Parts:  Nut

• Tighten the nuts (1) on the tail light (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Replace nut (2).

  Parts:  Nut

• Tighten nut (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Check the clips (1) and the guides (2) on the water drain (3) for damage, replacing them if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the water drain (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the adhesive tape in area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .