Removing right luggage compartment wheel arch trim panel

Preliminary work 

• Refer to REMOVING RIGHT BACKREST SIDE SECTION .
• Refer to REMOVING REAR SEAT BENCH .
• Refer to REMOVING REAR SEAT BACKREST .
• Refer to REMOVING THE LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to REMOVING THE LOADING EDGE TRIM .

• Lever out the cover (1) and release the screw underneath.
• Remove the lashing point (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the cover (1) towards the top.
• Loosen the expanding rivet (2).
• Fold the luggage compartment wheel arch trim panel (3) to the side and disconnect the associated plug connection.
• Remove the luggage compartment wheel arch trim panel (3).

  Courtesy of BMW OF NORTH AMERICA, INC.