LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
M5 Base
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (2 Of 2)
>>
Removing the holder with the vehicle wiring harness for the sensor system of cylinder bank 2
Removing the holder with the vehicle wiring harness for the sensor system of cylinder bank 2
Loosen screws (2).
Disengage the coolant ventilation line in area (1).
Unlock plug connection (3) and disconnect.
Place aside the holder with the vehicle wiring harness for the sensor system.
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.