Securing wiring harness to cylinder bank 1
- Position wiring harness.
- Engage cable clip (2) .
- Tighten down screw (1)
.TIGHTENING TORQUES SPECIFICATION
Wiring harness to cylinder head cover M6x16 screw tightening torque 10 Nm - Tighten nut (2)
.TIGHTENING TORQUES SPECIFICATION
Ground cable to hold-down device Nuts Tightening torque 5.5 Nm - Tighten down screw (1) .
TIGHTENING TORQUES SPECIFICATION
| Wiring harness to cylinder head cover | ||
| M6x16 screw | tightening torque | 10 Nm |