Removing upper oil sump section (engine removed)

• Unlock and disconnect plug connections (1)  .
• Disengage the cable bracket (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position special tool 0 493 936 (11 9 240) (2)  on the oil filter housing.
  NOTE: TECHNICAL INFORMATION 
  Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
• Release oil filter housing (1)  .
• Remove oil filter housing (1)  with filter.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen nut (1)  .
  NOTE: TECHNICAL INFORMATION 
  Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
• Pull off engine oil pipes (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  .
• Release screws (2) with the special tool 0 496 646 (11 4 410)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws in areas (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.