Loosening the brake caliper, left and right

NOTE: Perform the steps on the right and left side.

Releasing the brake caliper

Release brake hose from the brackets (1) .
NOTE: Only perform the operation on the left side.
Release the cable of the brake pad wear sensor from the holders (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen nuts (1) .
Pull the brake caliper from the stud bolts towards the rear.
Do not hang the brake caliper from the brake hose.

Courtesy of BMW OF NORTH AMERICA, INC.
Tie up the brake caliper (1) with the special tool 2 413 317 .

Courtesy of BMW OF NORTH AMERICA, INC.