Remove front cross connection

Preliminary work 

• Refer to REMOVING THE COVER IN THE ENGINE COMPARTMENT ON THE LEFT .
• Refer to REMOVING THE COVER IN THE ENGINE COMPARTMENT ON THE RIGHT .
• Refer to RELEASING LEFT FRONT-END STRUT .
• Refer to RELEASING THE RIGHT FRONT-END STRUT .

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach the Bowden cable (1).
• Feed out the cross connection (2) with the holders (3) and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.