Installing the trailing arm

• Position the trailing arm (1).
• Replace screws (3) and nuts (2) and (4).

  Parts:  Bolts, nuts

• Insert the screws (3).
• Apply the nut (2) and (4) hand-tight.

  The threaded connections are tightened later in NORMAL POSITION .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to MEASURING THE RIDE HEIGHT OF THE REAR AXLE AND SETTING THE NORMAL POSITION .
• Refer to TIGHTENING THE SCREW CONNECTIONS ON THE TRAILING ARM .