Install vibration absorber on the rear differential

• Position the vibration absorber (1).
• Replace the screw (2).

  Parts:  Screw

• Position and tighten the screw (2).

TIGHTENING TORQUE SPECIFICATION

Vibration absorber at rear axle
M8 Replace screw.	Tightening torque	28 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATION

Vibration absorber at rear axle
M10 Replace screw.	Joining torque	56 Nm
	Angle of rotation	90°