Installing the VDP control unit

• Connect and lock the connector (1) on the VDP control unit.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the nuts (2).
  TIGHTENING TORQUE SPECIFICATION
  
  

  VDP control unit to body
  Plastic nut Replace plastic nut.	tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fold back the carpet in the footwell (1).

Follow-up work 

• Refer to INSTALLING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE LEFT A-PILLAR .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to RECONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to PROGRAM/ENCODE THE VDP CONTROL UNIT .
• Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .