32 13 Steering Gear
3213 TIGHTENING TORQUE OVERVIEW
| Electromechanical steering gear to front subframe | ||
| M12 Replace screws. The tightening sequence must strictly be followed and carried out on all screws at the same time! 1: left front 2: right rear 3: right front 4: rear left |
1. Tightening torque | 60 Nm |
| 2. Tightening torque | 96 Nm | |
| Angle of rotation | 90° | |
| Heat shield to electromechanical steering gear | ||
| M6 | Tightening torque | 8 Nm |
| Special tool on rack | ||
| Tightening torque | 15 Nm | |