Connecting the connector to the servomotor (GHAS)

• Connect connectors (1) and lock.
• Secure the cables on the holders (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the ground strap (2) on the rear axle differential.
• Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATION

Ground strap on rear axle differential
M6x20	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the heat shield (2).
• Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATION

Heat shield to servomotor
M5x10	tightening torque	5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.