Removing the covers for the interior rearview mirror

• Version A: 
• Release cover (1) in the middle with a suitable plastic wedge from the latch mechanisms and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version B: 
• Release the cover panel (1) from the detents (2) with a suitable plastic wedge and remove laterally.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version C: 
• Release cover (1) from the clamps (2) in the marked area using a suitable plastic wedge and pull down a certain distance.
• Release cover (1) at the retaining lugs (3) and remove from the guides to the rear.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release cover (1) from the detents (2) and (3) and remove sideways.
• Remove cover (1) from mirror base (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version D: 
• Release covers (1) and (2) using a suitable plastic wedge at the separation point (3) and remove to the side.

Courtesy of BMW OF NORTH AMERICA, INC.