Installing the belt tensioner
NOTE:
TECHNICAL INFORMATION
The belt tensioner must be installed to relieve the tension. The special tools or transportation retainers must be installed for disassembly.
The belt tensioner must be installed to relieve the tension. The special tools or transportation retainers must be installed for disassembly.
- Guide the belt tensioner (1) in at the alternator and install.
- Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATION
| Belt tensioner to alternator/starter motor generator | ||
| M8X30 | Tightening torque | 28 Nm |
Follow-up work
- Refer to INSTALLING THE ALTERNATOR .
- Refer to INSTALLING THE DRIVE BELT FOR ALTERNATOR .
- Refer to INSTALLING THE ACOUSTIC COVER FOR THE ENGINE, FRONT .
- Refer to ATTACHING THE ELECTRIC AUXILIARY COOLANT PUMP FOR THE CHARGE AIR COOLER AND/OR AIR CONDITIONING CONDENSER .
- Refer to INSTALLING THE THROTTLE BODY .
- Refer to INSTALLING THE CLEAN AIR PIPE WITH THE RESONATOR .
- Refer to INSTALLING ACOUSTIC COVER .
- Refer to RECONNECTING ALL BATTERY GROUND LEADS .