Install front door trim panel

• Check the clips (arrows) for damage; if necessary, replace them.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check stop pad (1) for damage; if necessary, replace it.

Courtesy of BMW OF NORTH AMERICA, INC.

• Push the inner door opener to the closed direction.
• Guide in the Bowden cable for the inner door opener (2) and clip it in with detent (1).
• Connect connectors (3) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in front door trim panel (1) from above over operating rod (3) and clip it in with detents (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in door trim panel (1) at the marked positions.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Door trim panel
  Oval-head screw	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check detents (1) and guide (2) on cover (3) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Detents (1) or guides (2) are damaged.

Measure 

• Replace cover (3).
• Mount cover (1) and clip it in with detents (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check detents (1) and guides (2) on the cover of door opener (3) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Detents (1) or guides (2) are damaged.

Measure 

• Replace the cover of door opener (3).
• Pull the door opener.
• Feed in the cover of door opener (1) with the guides and clip it in with detents (2).

Courtesy of BMW OF NORTH AMERICA, INC.