Install the rubber window seal

• Coat the rubber window seal (1)  with lubricant approved for use.
  CONSUMABLE SPECIFICATION
  
  

  Installation aid  (Circo Light; lubricant)

  250 ml, Bottle

  83192405829

• Correctly position the rubber window seal (1)  on the door and install.
• Install the rubber window seal (1)  correctly in the window guide rail (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the rubber window seal (2)  correctly.
• Fasten the rubber window seal (2)  to the clips (3)  .
• Install the expanding rivet (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the rubber window seal (2)  correctly.
• Fasten the rubber window seal (2)  to the clips (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING THE FRONT MODULE BRACKET .
• Refer to INSTALLING THE WINDOW CHANNEL STRIP (FRONT) ON THE DOOR .
• Refer to FITTING VEHICLE EXTERIOR MIRROR .
• Refer to INSTALLING THE MIRROR TRIANGLE .
• Refer to INSTALLING THE FRONT DOOR TRIM PANEL .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to ADJUSTING THE FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING OUTER WINDOW CHANNEL STRIP .