Installing the outside door handle

Check the seal (1) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Check the seal (1) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the front outside door handle (2).
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the rear outside door handle (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Tighten the clamping bolt (1) on the outside door handle support with the special tool 2 450 364 .

TIGHTENING TORQUE SPECIFICATION

Clamping bolt for door handle
screw	Tightening torque	2 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATION

Outside door handle to door
Clamping bolt	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.