Replacing the support for the bottom front bumper cover

• Detach the impact absorber (1)  from the detents (arrows) and remove it.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the support for the bottom front bumper cover.

  Parts:  Support for bottom front bumper cover

Check 

• Check all latch mechanisms (arrows) on impact absorber (1)  for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Detents are damaged.

Measure 

• Replace the impact absorber (1)  .
• Position the impact absorber (1)  and clip it in at the detents (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.