Remove The Outer Wheel Arch Section With The Reinforcement

• Remove cavity sealings (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the welded connections in area (1) and remove the reinforcement of the C-pillar.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark and make separating cut (1) according to dimension (a).

  Dimension (a) = 20 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark and make separating cut (1) according to dimension (a).

  Dimension (a) = 20 mm

• Release the welded connections in areas (2) and remove the outer wheel arch section.

Courtesy of BMW OF NORTH AMERICA, INC.